Device Management - Sony Ericsson M600i User Manual

dimmed level you set on the Brightness
tab.
Brightness tab
Select the backlight mode and adjust the
brightness with the slider or Jog Dial.
Select to reset all light levels to the
Default
factory defaults.

Device Management

Device management enables the remote
distribution of settings for your phone (for
example, Internet, email, SMS, and MMS
settings). It also makes it possible to manage
(list, install, update, and uninstall) themes and
client software on a group of phones. As an
example, device management is useful when
an enterprise has defined a set of standard
software that all employees' phones should
contain.
To enter settings into or manage software in
your phone, a device management session is
set up between it and a device management
server. A session can be initiated by you or the
server.
Device management dialog
Select
Tools > Control panel > Device >
Device management
management server profiles, if any, are listed.
The settings for the profile describe how it will
M600i
This is the Internet version of the user guide. © Print only for private use.
. The device
respond to the start of a Device management
session and the notifications communicated
during the session. In the Device management
dialog, you can:
• Initiate the phone management session by
highlighting a profile, then selecting
.
Connect
• Create a new device management server
profile manually by selecting
.
profile
• Initiate reconfiguration for a new mobile
network operator by selecting
. This might be necessary if
Clear ACL
your phone is already configured for
another mobile network operator.
• Edit or delete device management server
profiles.
Note: A profile may be locked by the mobile
network operator. If this is the case, you
cannot edit or delete the profile or clear ACL.
The device management dialog consists of two
tabs, and
Details Settings
you can edit connection details, such as the
username for the device management server
account and the server ID and address. In the
tab, you set the behavior of the device
Settings
management session.
More > New
More >
. In the
Details
Control Panel
tab,
73