Craftsman 973.111330 Owner's Manual page 7

A WARNING: Alwayswear safety gogglesor
safelygla_es with skle shieldswhenoperating
tools. Failureto do an couldresultIn objects
beingthrownInto youreyes, resultingin possible
sadous injury.
,_ WARNING: Do notallowferniliadty with your
drillto make youcarein_s.Renlemberthat a
carelessfractionof 8 secondis sufficient t o inflict
severe injury,
CHARGING BA'rrERY PACK
"l_e batteryl_ickfortlgstool has hae_ shlpbad in a
lowchargecondl_m to preventpossibleproblems.
Therefore,yo,Jshouldcharge It at least3 to 5 houm
pdorto usa.
Note: Batterieswill not rsashfullchargetha flrcttirne
they arecharged.Allowsaveral cycles(drilling
fcllowedby recharging) t or thamto bacome fulty
charged.
TO CHARGE
• Charge batterypack onlywith the chargerand
chargingstandprovided.
• Meb sum powor 8upply 18 norms! houeo
voJtage, 120 voR8, SOHz, AC only.
• Connect charger to power supply.
• Place battery pack in charging stand. Align raised
rib on battery pack with groove in charging stand.
See F/gum 1.
• Press down on battery pack to be sure contacts on
battery pack engage propelly with contacts in
charging stand.
• When propedy connected, the red light on charging
stand will turn on.
• Ne_ _she_r does n_x c t_ge baaery p pck, r ctum
hattery back. charg_ rand. a nd shaft toyour
nearest Sears Reppir Center for elec_ceJ check.
• Nter nom_ usage, 3 to 5 hours of _ time is
req,Jred toba_=ycharged. Am_rnurn charge _rne o_ 5
hours _ s req_red t orecharge acompl_ d_charged
tool.
• The battery pack will become slightly warm to the
touch while charging. This is normal and does not
Indlc_e a problem.
• Do not place charger in an area of extreme heat or
cold. It will work best at normal room temperature.
• When battades become fully charged, unplug
charger from power supply.