Table of Contents
Advertisement
Bradley Belt-Drive With Electric Clutch Mower Parts
Read This Manual Carefully And Thoroughly Before Operating The Mower
1.
Carefully and thoroughly read the owner's manual. Allow adequate time to fully understand
the controls and operation of the equipment.
2.
Never allow anyone to operate the mower that has not read and fully understood the owner's
3.
manual. Do not carry passengers. Avoid mowing while people, especially children and pets are
nearby, since
Operator:
Wear protective clothing while mowing. Long trousers and safety glasses will help reduce the risk of
injury from thrown objects. It is recommended that steel toe shoes with aggressive soles or some
other type of substantial footwear be worn to help protect your feet and maintain traction on slopes
or uneven ground. Always wear hearing protection.
Mowing Area:
Thoroughly inspect the area where the equipment is to be used. Look for items such as stones, sticks,
wire and other foreign objects. When struck by the mower, these and other objects my become
projectiles that could lead to serious injury and/or death.
Mower:
For your safety and the long life of your mower, always inspect the mower before each use.
Before inspection, make sure it is on a flat and level surface, the blades are disengaged, the ignition
switch off with the key removed, and the spark plug wire is off of the spark plug(s) and hidden so that
accidental contact can not be made.
General Condition:
●Walk around the mower looking for any fluid spills or leaks on or underneath the mower. Remove
any and all excessive debris, dirt, and/or fluids.
Look for signs of damage or excessive wear. Check the tightness of all nuts, bolts, pins, and
●
screws. Tighten any that may be loose and replace any that may have been lost during use.
●Be sure the safety interlock controls are operating properly so that the engine can not be started
unless the ground speed control lever is in neutral and the blades disengaged.
Check the mower blades for any damage or abnormal wear and replace in sets so that they
●
are balanced.
●Check the tire pressure on all four tires. See page 15 for details.
●Check all belts for proper wear and correct tension. See pages 17-19 for details.
●Check engine oil and air filters as recommended in the engine manufacturers operators manual.
SAFETY INFORMATION
Before Use of Equipment
Training
4
!
Advertisement
Table of Contents
