Bradley Belt-Drive With Electric Clutch Mower Parts
Engine To Transmission Belt Adjustment: (Refer to figure11)
11
)
The engine to transmission belt, located underneath the rear deck, should move 3/16 with 5 lbs. of
1.
pressure applied midway on the belt between the transmission pulley and the engine output
shaft pulley.
To adjust the belt, loosen nut "A" on idler pulley "B".
2.
Slide idler pulley "B" to tighten or loosen and secure in place by tightening nut "A".
3.
Midway Point
Engine Pulley
Transmission Pulley
Figure 11
28