Pkm SBS436NFWDIX Instruction Manual page 77

4.4 Setting of the temperature
WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.
NOTICE! If you want to switch off the appliance for a longer period of time,
disconnect it from the mains (unplug!). S. also chapter D
.
TEMPORARILY
 The settings of the temperature of both the fridge and freezer can be adjusted
manually by pressing the relevant buttons (button "T
setting of the temperature of the fridge) until the desired values will be indicated (s.
chapter 4.3 O
PERATING BUTTONS AND INDICATORS OF THE DISPLAY
 When you set a temperature, you set an average temperature for the whole
refrigerator. Temperatures inside each area may vary from the set temperature,
depending on how much food you store and where you place them. Ambient
temperature may also affect the actual temperature inside the appliance. When you
set the temperature of both the fridge and freezer, these aspects should be taken into
account.
W
HEN YOU OPERATE THE APPLIANCE FOR THE FIRST TIME
F
F
These settings can be changed as needed.
When the ambient temperature is very high, it is recommended to set the
temperature of the fridge and / or freezer to a colder setting if needed. If the colder
setting should cause strong formation of encrusted ice, please select a lower setting.
High ambient temperatures and simultaneously operating at the coldest setting may
make the compressor operate permanently to keep the temperature constant inside
the appliance.
TEMPERATURES ARE
RIDGE
REEZER
EMP
:
77
ECOMMISSIONING
./F ." (1) for the
UNC
).
,
THE DEFAULT
+ 4 C
0
- 18 C
0
,