Pkm SBS436NFWDIX Instruction Manual page 102

When you operate the appliance for the first time or the temperature falls below
a certain level, the appliance will operate with high power to reach the preset
temperature.
may be generated inside or outside the appliance by high humidity or very warm
ambient temperatures.
You will hear the compressor click if it is activated or deactivated.
is caused by the compressor while running.
may be generated by sequential expansion and shrinkage of the components of
the cooling system. It is caused by variation of temperature before and after the
compressor is activated or deactivated.
8. Decommissioning
I
F THE APPLIANCE IS NOT USED FOR A LONGER PERIOD OF TIME
1. Disconnect the appliance from the mains. To disconnect the appliance from the
mains, you must unplug the appliance or use a cut-off device.
2. Remove all food stored in the appliance.
3. Dry the inside of the appliance with a cloth and leave the door open for a few days.
D
C
ONDENSED WATER IN
K
NOCKING
D
ECOMMISSIONING
ISTINCT NOISE
/
ON THE APPLIANCE
C
LICKING
H
UM
/
SNAPPING
,
TEMPORARILY
102
:
: