Motherboard Manual
Step 2: Insert the DIMM firmly into the slot until the retaining chip snap back in place
and the DIMM is properly seated.
Note1: The DIMM must be installed to DIMMA1 slot first.
Note2: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
B. Memory Capacity
DIMM Socket Location
DIMMA1
DIMMB1
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status
Disabled
Enabled
(O means memory installed, X means memory not installed.)
Note: The DRAM bus width of the memory module must be the same (x8 or x16)
6
DDR3L Module
512MB/1GB/2GB/4GB/8GB
512MB/1GB/2GB/4GB/8GB
DIMMA1
O
O
Total Memory Size
Max is 16GB
DIMMB1
X
O