Recycling The Clippings - Toro Recycler 22287 Operator's Manual

Table of Contents

Advertisement

Figure 17
1. Self-propel-drive bar

Recycling the Clippings

This machine comes from the factory ready to recycle grass and leaf clippings back into the lawn. To prepare
the machine to recycle:
If the grass bag is on the machine, remove it (A of
If the rear-discharge plug is not installed, grip it by the handle, raise the rear deflector, and insert it into the
rear-discharge chute until the latch locks into place (B of
WARNING
Operating the machine to recycle lawn clippings without the plug in place allows objects to be
thrown toward you or bystanders. Also, contact with the blades could occur. Thrown objects
or blade contact can cause serious injury or death.
Ensure that the rear-discharge plug is in place before you recycle the clippings. Never engage
the blades without either the rear-discharge plug or the grass bag installed on the machine.
g240765
Figure
18).
Figure
18).
Figure 18
17
g236734

Advertisement

Table of Contents
loading

Table of Contents