Table of Contents
Advertisement
1.
Remove both handle bolts and corresponding nuts.
2.
Move the handle to the desired height position.
3.
Secure the handle with the previously removed bolts and corresponding nuts.
Adjusting the Cutting Height
CAUTION
If the engine has been running, the muffler will be hot and can burn you.
Keep away from the hot muffler.
Adjust the cutting height as desired. Set all wheels to the same cutting height
During Operation
During Operation Safety
General Safety
•
Wear appropriate clothing, including eye
protection; long pants; substantial, slip-resistant
footwear; and hearing protection. Tie back long
hair and do not wear loose clothing or loose
jewelry.
Figure 14
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Do not operate the machine while ill, tired, or
under the influence of alcohol or drugs.
•
The blade is sharp; contacting the blade can result
in serious personal injury. Shut off the engine and
wait for all moving parts to stop before leaving the
operating position.
14
(Figure
14).
g234297
Advertisement
Table of Contents
