IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: • Read all instructions carefully. • Do not touch hot surfaces. Use handles or knobs. • To protect against fire, electric shock and personal injury do not immerse cord, plugs or appliance in water or other liquid.
• Do not place your Nespresso machine on a hot surface (electrical heating plate for example) or near a flame. • Attention: Do not draw off hot water while temperatur indicator lamp (red) blinks fast. Strong steam jet would result instead of hot water - hazard of burning! Cool down the system see Cappuccino «4».
Page 4
Descaling Descaling warning: All green lamps are flashing Nozzle Remove nozzle/ cappuccinatore Dismantle the device and adapter cappuccino device Preparation Machine Recipient (min. 0.6 l) Eject capsule Empty drip tray, 0.1l descaling Place cloth in case remove Claris filter agent + 0.5 l water of steam injection Descaling START:...
Volume Factory setting: 40 ml 110 ml Change setting Press button M Coffee Hot water Within 10 seconds Press + hold Lever to the right STOP Fill cup min. 15 ml Release button Lever to the left Within 10 seconds: Press button M New volume has been stored Troubleshooting No indication...
Page 6
Preparation Temperature indicator: Switch on Jaw closed flashing: constant: rapid flashing: heating up ready too hot Fill water tank fresh water Before the first usage / after a longer period of non-use: Rinse Coffee outlet + hot water / steam nozzle Place a recipient Let water flow for Let water flow for...
Page 7
Espresso Insert capsule Place a cup on drip grid Select small or large STOP automatic or The capsule drops Keep system Eject into capsule warm capsule container Daily after last espresso Capsule container Some left over water is normal...
Page 8
Lever coffee / hot water (steam) Fresh water tank Handle Capsule container Cappuccinatore (22 capsules) device Drip grid Drip tray Status display Call authorized dealer Reposition lever Water tank empty ON/OFF button Indicator of temperature Capsule container full MEMORY lamp/button Hot water button/lamp Large cup lamp/button Small cup lamp/button...
Page 9
Cappuccino Froth milk for Preparing the milk Select «steam» heating up ready STOP Froth OK Beware of hot nozzle Temperature change ~55-75°C ready STOP Cool down system too hot Place a recipient Let water flow for 30 seconds Espresso Prepare espresso direct into the frothed up milk...
Page 10
Cappuccino – Caffe latte: clean after each use Warm up phase Deep into fresh water Beware of hot nozzle STOP Rinse minimum 10 sec. Dismantle and clean cappuccinatore once a week...
Need help?
Do you have a question about the ES 80 and is the answer not in the manual?
Questions and answers