Table of Contents
Advertisement
OPERATION
2. Select Power Source Desired
AC OPERATION: Plug the small connector of the AC adapter into the DC power input
located on the side of the unit. Plug the AC end into a grounded wall-outlet power
source.
NOTE: The power supply may become warm to the touch during charging or running
of the unit. This is normal.
12V DC OPERATION: (such as a car lighter receptacle.) Plug the small connector of
the DC power cord into the DC power input on the side of the unit. Plug the large
connector into the 12V DC power receptacle of the automobile.
BATTERY OPERATION: Verify that your unit has an internal rechargeable battery; To
ensure proper operation from internal battery, fully charge the battery for 1-1.5 hours
(depending on the depth of discharge) as explained in the Battery Charging section. To
operate the unit from an internal rechargeable battery, ensure that no external power
sources are plugged into the DC power input on the side of the unit.
AC Adapter
-6-
Advertisement
Table of Contents
