General Instructions; Safety; Grouped Safety Messages; Intended Use - Holex 421727 User Manual

HOLEX Digital outside micrometer with measuring tip
de
1.

General instructions

Read the instructions for use, follow them and keep them available for later reference.
bg
2.

Safety

da
2.1.

GROUPED SAFETY MESSAGES

CAUTION
en
Leaking electrolyte
Eye and skin irritation due to leaking, toxic and corrosive electrolyte.
▶ Avoid contact with your eyes and body.
fi
▶ In the event of contact, rinse out the affected area immediately with plenty of water and consult a doctor.
2.2.

INTENDED USE

fr
 Outside micrometer for digital and analogue reading.
 For both industrial and private use.
 Use it only in accordance with the technical data.
it
 Use only when it is technically in good condition and safe to operate.
2.3.

REASONABLY FORESEEABLE MISUSE

 Avoid vibration, abrupt movement, shaking, impacts.
hr
 Do not use in explosion hazard areas.
 Do not expose to strong magnetic fields or high voltage environments.
lt
 Do not expose the work lamp to intense heat, direct sunlight or naked flames.
 Open the casing only at the battery cover to change the batteries.
 Do not make any unauthorised modifications.
nl
3.

Transport

Transport in the original packaging at temperatures between -10°C and +60°C. Prevent from falling.
no
4.

Device overview

4.1.

OUTSIDE MICROMETER

pl
A
1 Yoke 2 Anvil with flattened measuring surface 3 Measuring spindle with measuring tip 4 Clamping lever 5 Button
"ON/OFF - SET" 6 Button "ABS/INC - UNIT" 7 Scale sleeve 8 Scale drum 9 Friction ratchet 10 Quick adjustment 11 Battery
pt
cover (back) 12 Adjustment hole (back) 13
measuring surface
ro
4.2.

DISPLAY

B
Digital display:
sv
1 Low battery voltage 2 Measuring mode "Absolute" 3 Measuring mode "Incremental" 4 Zero point adjustment 5 Di-
gital measured value 6 Display measuring unit
Analogue display:
sk
7 0.01 mm - scale on scale drum 8 Scale for full millimetres on scale sleeve 9 Bezugslinie 10 Skala für halbe Millimeter auf
Skalenhülse 11 Reading edge
sl
4.3.

SCOPE OF SUPPLY

 1x Outside micrometer
 For measuring range from 25 mm: 1x setting gauge
es
 1x Adjustment tool
cs
hu
20
Lorem ipsum
LCD display 14 Insulating plate 15 Adjustment tool 16 Dimensions of the remote