Adjusting The Brake Pedal Free Play - Yamaha TT-R110E 2018 Owner's Manual

Periodic maintenance and adjustment
5. Loosen the locknut at the brake
shoe plate.
6. To increase the brake lever free
play, turn the adjusting bolt at the
brake shoe plate in direction (a).
To decrease the brake lever free
play, turn the adjusting bolt in di-
rection (b).
(a)
1. Locknut
2. Brake lever free play adjusting bolt
7. Tighten the locknut at the brake
shoe plate.
8. Tighten the locknut at the brake
lever, and then slide the rubber
cover to its original position.
(b)
2
1
7-19
Adjusting the brake pedal free
play
Measure the brake pedal free play at
the brake pedal end as shown.
1. Brake pedal free play adjusting nut
2. Brake pedal free play
Brake pedal free play:
10.0–20.0 mm (0.39–0.79 in)
Periodically check the brake pedal free
play and, if necessary, adjust it as fol-
lows.
To increase the brake pedal free play,
turn the brake pedal free play adjusting
nut at the brake rod in direction (a). To
decrease the brake pedal free play,
turn the adjusting nut in direction (b).
WARNING
 After adjusting the drive chain
slack or removing and installing
the rear wheel, always check
the brake pedal free play.
 If proper adjustment cannot be
obtained as described, have a
Yamaha dealer make this ad-
justment.
EAU44673
7
EWA14821