Countertop Installation - Black & Decker EM925AB9 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

Countertop Installation

Remove all packing material and accessories. Examine the oven for any damage such as
dents or broken door. Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet surface.
Do not remove the light brown Waveguide cover that is attached to the oven
cavity to protect the magnetron.
Installation
1.
Select a level surface that provide enough open space for the intake
and/or outlet vents.
12 inch(30cm)
3.0 inch(7.5cm)
3.0 inch(7.5cm)
A minimum clearance of 3.0 inches (7.5cm) is required between the oven and
any adjacent walls. One side must be open.
(1) Leave a minimum clearance of 12
(2) Do not remove the legs from the
(3) Blocking the intake and/or outlet openings can damage the oven.
(4) Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to your radio or TV
reception.
2. Plug your oven into a standard household outlet. Be sure the voltage and the
frequency is the same as the voltage and the frequency on the rating label.
WARNING: Do not install oven over a range cooktop or other heat-producing
appliance. If installed near or over a heat source, the oven could be damaged and
the warranty would be void.
OPEN
s
inches (30cm) above the oven.
bottom of the oven.
EN-8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents