AFRISO FloorControl RT01 Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL
AFRISO-EURO-INDEX GmbH
Lindenstr. 20
D-74363 Güglingen
www.afriso.com
WARNING!
Work on electrical circuits should only be carried out by an authorised electrician.
Do not allow the device to come into contact with water.
Before dismantling the housing, disconnect the wiring box or other controlled device
from the power supply.
Do not make any modifications to the device.

Description of the device

The FloorControl RT01 thermostat is a compact device with
a display and built-in temperature sensor that enables precise
temperature setting in a single room or multiple rooms.
The thermostat is powered by two AAA batteries.
The FloorControl RT01 room thermostat is connected
to the FloorControl WB01 D-8 underfloor heating wiring box
to control the floor heating system.
The RT01 thermostat can also be used to turn on/off any
heating/cooling device.

Compatibility with wiring boxes

The FloorControl RT01 D-BAT thermostat (Art. No. 86 018) can be connected to the WB01 D-8-230
box (power supply 230 V AC - Art. No. 86 013) or to the WB01 D-8-24 box (power supply 24 V DC -
Art. No. 86 014).

Wall mounting

The thermostat's mounting location must provide protection from
the weather. The RT01 thermostat is designed for wall mounting.
The thermostat is fixed to the wall through the mounting holes (A) in
the back of the housing. To disconnect the rear part of the housing from
the thermostat, they must be dismantled and released from the latches.
Dimensions
4 4 3 3
22 22
10,6 10,6
Service AFRISO
Tel. 07135 102 0
service@afriso.de
2 2
81 81
60 60
37,8 37,8
11,51 11,51 57,1 57,1
FloorControl RT01
D-BAT room thermostat
Electrical connections with
FloorControl WB01 D-8 box
1 1
D D
C C
953.011.0093
Current room
temperature
A
NO COM NC
Display
+
_
1