Table of Contents
Advertisement
Operating the Self-Propel
Drive and Engaging the
Blades
This machine has 3 ground speeds: 1 (slow), 2
(medium), and 3 (fast); it also has a Neutral (N)
position. The self-propel-drive lever is located below
and behind the fuel tank
Figure 17
1. Self-propel-drive lever
1.
Move the self-propel-drive lever to the desired
ground speed.
2.
Start the engine.
3.
To operate the self-propel drive, squeeze the
self-propel-drive bar
Figure 18
Note:
You can vary the ground speed by
increasing or decreasing the distance between
the self-propel-drive bar and the handle.
(Figure
17).
(Figure
18).
To engage the blades, do the following:
1.
Press and hold the blade-control lock-button to
engage with the blade-control bail (A of
19).
2.
While holding the button, pull the blade-control
bail to the handle; the blade should engage (A
of
Figure
3.
Release the blade-control bail to disengage
the blade (B of
lock-button resets.
g024167
g412511
16
19).
Figure
19). The blade-control
Figure 19
Figure
g412517
Advertisement
Table of Contents
