TP-Link TL-CPE710 Installation Manual page 10

c. Repeat step a and step b to attach the other Side Reflector
Panel.
d. Attach the Side Reflector Panels to the Center Reflector Panel
more securely using four M2.5*8 combination screws with
M2.5*2 nuts (only provided with CPE710).
2. Attach the Rear Cover to the reflector assembly as follows:
a. While holding the reflector assembly, align the raised edges
on the back with the Securing Arms of the Rear Cover, and
align the Snap Hooks on the Rear Cover with the slots on the
Center Reflector Panel.
08