Table of Contents
Advertisement
REMOVINGBITS
See Figure 7.
•
Lock switch trigger on your drill by placing the
direction of rotation selector in center position.
See Figure
2.
•
Loosen the chuck jaws from driU bit.
•
To loosen: grasp and hold the collar of the chuck
with one hand, while rotating chuck body with your
other hand. Note: Rotate chuck body in the
direction of the arrow marked UNLOCK to loosen
chuck jaws.
•
Do not use a wrench to tighten or loosen the
chuck jaws.
•
Remove ddll bit from chuck jaws.
ADJUSTABLE
TORQUE
CLUTCH
See Figure 9.
Your drill is equipped with an adjustable torque clutch
for ddving different types of screws into different
matedals.
The proper setting depends on the type of
matedal and the size o_'screw you are using.
TO ADJUST
TORQUE
•
Identify the twenty four torque indicator settings
located on the front of your ddll. See Figure 9.
•
Rotate adjusting dog to the desired setting.
• 1 - 4
For ddving small screws.
•
5 - 8
For ddving screws into soft
matadal.
• 9-12
For ddving screws into soft and hard
materials.
• 13 - 16
For ddving screws in hard wood.
• 17 - 20
For ddving large screws.
• 21 - ,11
For heavy drilling.
TO DECREASE
TORQUE
ADJUSTING
RING
A
WARNING:
Always wear safety goggles or
safety glasses with side shields when operating
tools. Failure to do so could result in objects
being thrown into your eyes, resulting in possible
sedous injury.
LEVEL DRILLING
See Figure 10.
A convenient feature provided with your drill is a level.
It is recessed in the motor housing on top of your ddll.
It can be used to keep ddll bits level during drilling
operations.
.EVEL
Fig. 10
TO INCREASE
TORQUE
Fig. 9
lO
Advertisement
Table of Contents
