Technical Data; Definitions: Safety Guidelines - DeWalt DCMHT563P1 Original Instructions Manual

HEDGE TRIMMER
DCMHT563
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
Blade strokes (no load)
Blade length
Blade gap
Blade break time
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN60745:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
WALT one of the
e
DCMHT563
V 18
DC
1
Li-Ion
min 1400
-1
cm 55.8
mm 25
s <1
kg 2.9
dB(A) 79.5
dB(A) 90.5
dB(A) 3.1
m/s <2.5
2
m/s 1.5
2
EC-Declaration of Conformity
Machinery Directive
OUTDOOR NOISE DIRECTIVE
Hedge Trimmer
DCMHT563
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009 + A11:2010; EN60745-2-15:2009
+ A1:2010
2000/14/EC, Hedge trimmer, Annex V
DEKRA Certification B.V.
Meander 1051 / P.O. Box 5185
6825 MJ ARNHEM / 6802 ED ARNHEM
Netherlands
Notified Body ID No.: 0344
Level of accoustic power according to 2000/14/EC
(Article 13, Annex III):
LPA (measured sound pressure level) 79.5 dB(A), K=4.1 dB(A)
Uncertainty = 3 dB(A)
LWA (guaranteed sound power) 94 dB(A)
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
17.02.2016
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
English
WALT at
e
WALT.
e
3