Figure 39 Local/Remote Adapters On A Powerline Network; Figure 40 Adding An Adapter To Your New Network - ZyXEL Communications PLA-4 Series User Manual

Figure 39 Local/Remote Adapters on a Powerline Network

3 To set up a new powerline network, type the DAK Password and change the Network
Name on all powerline adapters you wish to add to your network.
• Look for the DAK Password on a label on your powerline adapter. The DAK
• Select the Remote adapter you want to add (A) and type the DAK Password in
• Then type the new network name in the Network Name field.

Figure 40 Adding an Adapter to Your New Network

4 Click Save.
• If you do not type the DAK password or type it incorrectly either of the following pop-
ups appear. Click OK and type the DAK Password correctly in the DAK Password field.
PLA-4xx Series User's Guide
Password lets you access the adapter.
the DAK Password field (B).
A
Chapter 6 Powerline Network Setup Tutorial
B
59