Engine And Sailing; Trolling Valve; After Running - Nanni N9.330 CR2 Operator's Manual

S07 STARTING & RUNNING

TROLLING VALVE

The Trolling valve system allows to reduce the rotation
speed of the propeller below its speed when the engine
is at idle. The boat speed is reduced by 30% to 70%.
CAUTION !
The Trolling valve system must never be used for
manoeuvring. It also must never be used at an engine
speed of more than 1200 rpm (refer to Gear Box
operating manual).

AFTER RUNNING

STOPPING THE ENGINE
CAUTION !
Never stop the engine by using the main switch. This
could damage the electrical system.
Before stopping the engine, let it run at idle in neutral for
few minutes, especially if the engine has been operated
at high speed and load. This will allow the coolant to
cool down the engine.
1. Start the fan in the engine compartment (if fitted) or
open the hold.
2. Turn the key of the starter switch counter-clockwise,
the engine stops and all indicators turn off. The
engine stops, all lamps go out. For panel without
key, press the ON/STOP button and release it. The
engine stops. Turn the key of the main panel counter-
clockwise. All indicators will turn off.
.
50