Table of Contents
Advertisement
OSD Function Description
Under Analog RGB Display
Item
Brightness
Contrast
Frequency
Phase
Vertical.
Horizontal
OSD Hor Pos
OSD Ver Pos
OSD Background
User Timeout
Color Temp
Red
Green
Blue
DPMS
Auto Source Select
Freeze Frame
Zoom
Scale Mode
Input Source Select
Auto Adjust
Factory Reset
Information
Function
To increase or decrease the brightness.
To increase or decrease the contrast.
To adjust frequency (dot clock).
To adjust phase (clock-phase).
To move the screen upward or downward
To move the screen left or right.
To move OSD menu left or right.
To move OSD menu upward or downward.
Choose between Opaque and Translucent.
Set OSD screen appearing time.
Choose between Default, System1, Sytem2, Sytem3, System4 for
color temp.
Balance Red.
Balance Green.
Balance Blue.
Enable or Disable DPMS.
Enable or disable auto source selection.
Enable or disable freeze frame.
Enable zoom-in function.
Choose scale mode between "Fill Screen", "Aspect Ratio", "One to
One"
Choose input source between "Analog RGB", "Composite Video",
"Super Video"
Press + to turn on this function. The Auto-Adjust will automatically
adjust V-Position, H-Position, Frequency, Clock-Phase. The whole
process takes about 5 seconds. (Please use the test pattern file in the
attached LCD monitor utility disk for Auto Adjust)
Set to factory default.
Display information on resolution, refresh rate and input mode.
17
Advertisement
Table of Contents
