Auto - scanning with digital control lcd color medical monitor (40 pages)
Summary of Contents for Advan AMM15TK2-TE
Page 1
AUTO-SCANNING WITH DIGITAL CONTROL LCD COLOR MEDICAL MONITOR AMM15TK3/AMM15TK2-TE/AMM15TK2-TEW Operation Manual For future reference, record the serial number of your display monitor in the space below: SERIAL number The serial number is located on the back of the monitor...
Page 2
“ELO” is a Registered trademark of Elo TouchSystems, Inc., All other trademarks are the property of their reference owners. This document is subject to change without notice. Advan provides this information as reference only. Reference to other vendor’s products does not imply any recommendation or endorsement. Revision Control...
TABLE OF CONTENTS Warnings and Cautions…………………………………………… 4 Warnings…………………………………………………………….. 5 Cautions……………………………………………………………… 6 Product Description and Intended Use…….………………….. 7 Functional Description……………………………………………. 8 Product Features…………………………………………………… 8 Cleaning instructions……………………………………………… 9 Symbol Explanations……………………………………………… 10 Regulatory Compliance…………………………………………… 11 EU Declaration of Conformity for Medical Applications……. 11 Prepare for Unpack…………………………………………………...
Product(s), therefore, may not agree in detail to the published design or specifications. All specifications are subject to change without notice. Please contact ADVAN Int’l Corp directly or phone your local ADVAN Int’l Corp sales representative or agent for information on changes and new products.
Warnings 1. Read the operating manual thoroughly and be familiar with its contents prior to using this equipment. 2. Carefully unpack the unit and check if any damage occurred during shipment. 3. Should any solid object or liquid fall into the panel, unplug the unit and have it checked by qualified personnel before operating it any further.
Cautions 1. The AC Adapter must be plugged into a Grounded power outlet. 2. Use only the proprietary AMM15TK3 power supply for the AMM15TK3 monitor. Make a proper connection by ensuring that the shrink tubing completely secures the connection between the DC power cord and the extension cord.
• Advanced Timing Setup (ATS): A unique technology from ADVAN is the One Touch Auto Adjustment. Pressing the Auto Adjust button on the front panel, automatically optimizes position, phase, frequency, contrast and color balance. This allows the user to maximize the perfect screen setting in the shortest amount of time.
Functional Description and Product Features • Display Type Color Active Matrix LCD • Control Buttons: -OSD menu display: Menu Button -Adjustment increase and Adjustment decrease -Power on/off -Auto adjust & exit OSD menu: Auto Button • Adjust brightness/contrast directly with the adjustment increase/decrease buttons. •...
Cleaning Instructions Advan AMM15TK2 Series Monitors will continue to operate normally while being cleaned in a fashion normal for a hospital environment. This includes cleaning with a damp (wrung out), mild soapy cloth. Protection from various chemicals used for cleaning.
Symbol Explanations Indicates proof of conformity to applicable European Economic Community Council directives and to harmonized standards published in the official journal of the European Communities Tested and certified by UL to UL60601-1. If this mark appears with the indicators "C" and "US" the product is certified for both the U.S and Canadian markets, to the applicable U.S and Canadian standards.
A Declaration of Conformity has been filed for this product. A sample of this document may be found in the addendum which accompanied this manual. For a copy of the Declaration of Conformity document, please contact ADVAN Int’l Corp. and request for AMM15TK3 DOC. Prepare for Unpack Before you unpack your monitor, prepare a suitable workspace.
Page 12
Please check if the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. ·AMM15TK2 Series Medical Monitor, VGA cable, S-Video cable, BNC cable and BNC to RCA adapter.
To make your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The DDC(Display Data Channel)is a communication protocol through which the monitor automatically informs the host system about its capabilities, for example, supported resolution and corresponding timing.
Screen Position Adjustment (with optional stand) In order to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can be adjusted up to 30 degrees as indicated by arrow below.
Power Management Function The monitor is equipped with the power management function which automatically reduce the power consumption when not in use in three power level modes. • Stand-by Mode The monitor goes into stand-by mode when the horizontal sync signal is off for about 10 seconds.
User Controls Front Panel Controls 1. Power LED : Lights up to indicate the power is turned ON. 2. Power Switch : To turn ON or OFF the power. 3. + : To increase the value of the parameter in the OSD you have selected for adjustment.
OSD Function Description Under Analog RGB Display Item Function Brightness To increase or decrease the brightness. Contrast To increase or decrease the contrast. Frequency To adjust frequency (dot clock). Phase To adjust phase (clock-phase). Vertical. To move the screen upward or downward Horizontal To move the screen left or right.
Under Composite or Super Video Display Item Function To increase or decrease the hue level. Saturation To increase or decrease the saturation level. Brightness To increase or decrease the brightness. Contrast To increase or decrease the contrast. Frequency To adjust frequency (dot clock). Phase To adjust phase (clock-phase).
10.7 lbs (4.8 Kg) Touchscreen model Optional Module Touch Panel * All contents are subject to change without notice. * Touch Screen Model doesn’t include the Video-in (C-Video, S-Video) function. * Surface Wave Touchscreen model AMM15TK2-TEW and Resistive Touchscreen model AMM15TK2-TE...
Connectors DC Input Connector Jack Power Input The SCD-014-1-A (SHIUA CHYUAN)or equivalent. Pin Description 1 +12V DC Video Input 15 pin D-subminiature connector. The vendor P/N is DHSB-15 FRF7(LEOCO) or equivalent. Description Description Red Video Green Video VGA CON Blue Video SDA (DDC1/2) Logic Ground H- sync...
Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. Problem Current Status Remedy · LED ON Using OSD, adjust brightness and contrast to Picture maximum or reset to their default setting. ·...
Page 23
This monitor is intended for use in Health Care Facilities model AMM15TK3 Equipment is not suitable for use in the presence of flammable anesthetic mixture with air or with oxygen or nitrous oxide. No user serviceable parts inside, ask qualified personnel when accessing inside. For disposal of waste product, follow the requirement of local code.
Electromagnetic Compatibility Like other electrical medical equipment, the AMM15TK3 requires special precautions to ensure electromagnetic compatibility with other electrical medical devices. To ensure electromagnetic compatibility (EMC), the AMM15TK3 must be installed and operated according to the EMC information provided in this manual. Note The AMM15TK3 has been designed and tested to comply with IEC 60601-1-2:2001 requirements for EMC with other devices.
The warranty period begins on the date of shipment from Advan. The goods sold hereunder are warranted for a period of 18 months from date of shipment unless otherwise agreed to by Buyer and Advan. No extension of the warranty will be given during the time the goods are in Advan possession.
Page 28
Note: Returns will not be accepted without an assigned RMA number. In-transit damage is not covered by warranty. We suggest you always insure your shipment. Advan will only pay for the return shipment by surface transportation. It is the responsibility of the sender to prepay transportation charges.
Tounchscreen User’s Manual (AMM15TK2-TE or AMM15TK2-TEW) Quick Start 1.Connect Power Code and VGA Cable of LCD Monitor. 2.Connect Touchscreen DB9 male RS-232 cable. 3.Turn the LCD display Power ON. 4.Adjust the tilt of LCD Monitor. 5.Adjust the Picture of LCD Monitor.
Page 30
4. Insert the Windows or Windows NT driver disk into diver A or B. 5. Browse for “setup.exe” in the directory to which you extracted the driver files. 6. Type “setup.exe” in the space provided and press Enter. 7. The touchscreen setup wizard will appear. You will need to select serial port, type of touchscreen controller, and language.
Page 31
ADVAN INTERNATIONAL CORPORATION 47456 Fremont Blvd. Fremont,CA 94538 Tel : 510-490-1005 Fax : 510-490-1151 Web Page : http://www.advancorp.com...