Sony HSR-X200 Operating Instructions Manual page 13

qa Jog dial (inner)
By rotating the Jog dial in Playback mode (PLAY
button indicator lit), you can gradually change the
playback speed. Clockwise rotation increases the
speed and counterclockwise rotation decreases it.
When you rotate the Jog dial in Still-Picture mode
(PAUSE button indicator lit), playback is performed
frame by frame. Clockwise rotation forwards the
frames and counterclockwise rotation reverses them.
For details on the operation, see "Variable-Speed
Playback" on page 34(GB).
In OSD operations, you can move the cursor on the
screen and select setting values using this dial.
qs ZOOM button and indicator (green)
The button permits you to zoom in on a part of the
camera input or playback image on the monitor screen.
Specify the part to be zoomed in using the Jog and
Shuttle dials.
While the zoom function is active, the indicator of the
ZOOM button lights. When you press the button
again, the normal size is restored.
For details on the operation, see "Zooming in on an Image"
on page 35(GB).
qd CHANNEL button and indicator (green)
When a multiplexer whose channel information can be
decoded is in use, channel selection will be enabled by
pressing this button. When you press this button in
Playback mode, the channel selection display appears
to specify the channel to be output. In this mode, the
indicator of the CHANNEL button lights.
Pressing the button again to turn off the indicator
resumes All-Channel mode.
For details, see "Multiplexer Connection and Associated
Settings" on page 41(GB).
qf SEARCH FRAME/FIELD button
When you press this button in a recording mode or in
stop status, the search operation display appears.
When an image recorded in Frame Recording mode is
played in Still-Picture mode, you can switch between
frame display and field display by pressing this button.
For details, see "Playback" on page 33(GB).
qg COPY button and indicator (green)
Press this button to copy the data to the archive area of
the built-in hard disk, a memory stick, or a DDS tape.
The indicator lights, and the copy-operation display
appears.
For details on the operation, see "Data Storage" on page
30(GB).
qh Menu reset button
Press this button to return the settings of the menu
items being displayed on the monitor to the factory-set
default settings.
qj PC CARD slot
By inserting a commercially available PC card
adaptor, copying of the recorded data to external
memory, such as memory sticks, will be enabled.
13
(GB)