Sony SVR-2000 Setup Manual page 34

34
Continuing Your Connection Steps
4 Connect the SVR Recorder to your telephone line.
Connect the SVR Recorder to your home telephone line. Use the phone cord
(supplied). If you do not have a spare telephone jack for the SVR Recorder, you
can plug the phone splitter (supplied) into your telephone jack. Then plug your
phone into one of the splitter's jacks and the SVR Recorder into the other.
5 Plug in the SVR Recorder power.
Now you should have everything connected and ready to go. Check all the
connections one more time, then turn on your TV equipment. To turn on the
SVR Recorder, plug the power cord into the back of the SVR Recorder. After a
few moments, you should see TiVo's Welcome Screen.
If you do not, you may need to change channels or change which input your TV
uses. If you used RF Coaxial cable in step 3, make sure you're viewing the same
channel (3 or 4) that you selected. If you're using S-Video or Audio/Video
cables, you'll need to change your TV so that it displays the appropriate input.
On some TVs, you need to use the "Input" button to switch inputs; other TVs
might label this the "Select" or "Video" button. Other TVs require that you keep
changing channels until the alternate input is displayed. If you have trouble,
double-check your connections and look for help in Additional Information (see
pages 55–60).
6 Guided Setup.
Once you see the Welcome to TiVo! screen, continue with the instructions in
Setting Up Your System on pages 41–54 to set up and activate the TiVo Service.