Control Panel Functions - HOMCOM YH-2001 Manual Instruction

Control Panel Functions

CONTROL OPERATION/FUNCTION
ON: Press the power switch ON. The power indicator light will glow,
and the flame effect will turn on.
OFF: Press the power switch OFF. All functions will turn off.
ON/OFF
FLAME INTENSITY: This knob controls the brightness of the flame
effect. Turn the knob to the right (High) to brighten the flame effect
Turn the knob to the left (Low) to dim the flame effect.
(NOTE: The ON/OFF switch turns the flame effect on and off. The
flame effect will not turn off unless the power is turned off.)
Flame
Intensity
THERMOSTAT: This knob controls the thermostat that turns the heat
on and off to maintain the desired temperature.
Turn the knob to the desired setting. The heat will turn on and off
automatically to maintain the set temperature.
(NOTE: If the room temperature is higher than the thermostat
Thermostat
setting, the Thermostat heater will not turn on.)
When the heat function is used for the first time, a slight odor may be
present. This is normal and should not occur again unless the heater
is not used for an extended period of time.
6