b) Insert the hard drive assembly into its slot in the system [1].
c) Flip down the tab at the end of the hard drive assembly [2].
d) Replace the 4 (M2.5x3.0) screws to secure the hard drive assembly to the system [3].
e) Slide the hard drive release latch into the lock position [4].
2. Install the:
a)
battery cover
b)
SD card
3. Follow the procedure in
Hard drive interposer board
Removing the hard drive interposer board
1. Follow the procedures in
2. Remove the:
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
47