Recording A Program To Your Vcr - Sony SAT-W60 User Manual

RECORDING –
continued
Select and press .
4 Done
The show will be recorded when it comes on.
SHORTCUT: If you don't need to see the Program Info screen before you record a
show, you can simply select the show in the Guide and press the
your remote control. Press twice to record the program on a regular basis,
such as daily or weekly. Press a third time to cancel the recording.
N O T E Look in the Guide. A red dot appears next to the show you just
chose to record. Multiple red dots appear if you chose to record the program on
a regular basis.
32
RECORDING –

RECORDING A PROGRAM TO YOUR VCR

Because recorded programs will eventually be erased from your receiver's hard
drive to make room for more recordings, you might want to record a show onto
videotape so you can keep it in your video collection.
button on
Before you record a program to your VCR, you must make sure the VCR is properly
connected to your receiver, as described in the Setup Guide. The Setup Guide also
shows you how to connect the VCR Control cable, which enables the receiver to
send programming signals to the VCR.
In addition, you must set up your receiver to record programs on the VCR.
To set up your receiver to record to the VCR:
1 From TV Home, select
The Settings screen appears.
continued
Settings at the bottom of the screen and press .
33