AEG 65Z Instruction Manual page 75

Manual for Model 65Z
Warning function
Warning beeping sound
- When operating correctly: 1 beep.
- When the memory is full 30 units of pattern: 2-short beeps.
- When operating incorrectly: 3-short beeps.
- When the sewing machine is in trouble and can't sew: 3-short beeps.
It means that the thread is twisted or jammed and the hand wheel axle can't move. Please
look through the "Trouble shooting guide" to find the solution. When the problem is
solved the machine will continue to sew.
Please Note:
If the problem is still not solved, please contact your local dealer.
Attention:
During the sewing, if the thread get jammed inside the hook, stopping the needle from
moving, and you continue pressing the foot control, the security switch will stop the
machine completely. In order to restart the sewing machine, you have to turn the on/off
switch to the OFF position and then ON again.
Instruction message display
Lowering the buttonhole lever
When you select any buttonhole pattern or
darning pattern, the figure of buttonhole
lever on the LCD screen is on to remind
you to lower the buttonhole lever.
Bobbin winding
When the bobbin winder spindle is
activated for bobbin winding (in the
rightmost position) this figure appears on
the LCD screen as a reminder.
Return bobbin winder spindle to left
If you press any button on the machine
when the bobbin is full or the bobbin
winder spindle is in the right position, the
machine will beep 3 times as a warning.
Return the bobbin winder spindle to the
left position.
73