AEG 65Z Instruction Manual page 34

Manual for Model 65Z
Function buttons
When stitches 00-04 are selected, the
needle position is regulated by the stitch
width adjustment buttons. If you press the
"–" button (left) the needle will move to the
left and if you press the "+" button (right),
the needle will move to the right.
The numbers can be changed from left
position "0.0" to extreme right position
"7.0". The pre-set center needle position is
indicated as "3.5".
11. MODE selection button
When you turn the machine "ON" the LCD
screen display will be set at direct mode
"
".
Press the " " button to "
if you press the function button again,
" " will be displayed. After a third
press, " " is displayed again.
Direct mode stitch selection.
Utility and decorative pattern
mode: Stitch selection using
number buttons.
Block letter mode: Character
selection using number buttons.
32
" mode,