Before Using For The First Time; Preparing And Cleaning The Appliance; Performing Initial Start-Up; General Information - Bosch VeroCafe TIE20 Series Information For Use

en first time
6 Before using for the
f i r s t t i m e
first time
Prepare the appliance for use.
f i r s t t i m e
6.1 Preparing and cleaning
the appliance
Remove the protective foils and
clean the appliance and individual
parts. Follow the illustrated instruc-
tions at the beginning of this manual.
ATTENTION!
Unsuitable beans can block up the
grinder.
▶
Only use pure, roasted bean mixes
that are suitable for use in fully
automatic coffee or espresso ma-
chines.
▶
Do not use glazed coffee beans.
▶
Do not use caramelised coffee
beans.
▶
Do not use coffee beans that have
been treated with additives con-
taining sugar.
▶
Do not add ground coffee.
→ Fig. 3 - 10
Note: Fill the water tank each day
with fresh, cold, non-carbonated wa-
ter.
Tip: To keep the coffee beans at
their best, store them in a sealed
container in a cool place.
You can keep the coffee beans in the
bean container for several days
without them losing their aroma.
6.2 Performing initial start-up
After connecting the appliance to the
power supply, configure the settings
for the language selection. The lan-
guage selection step only appears
when the machine is switched on for
the first time.
44
Press to switch on the appli-
1.
ance.
a The display will show the language
that is preset.
Press button
2.
peatedly until the display shows
the required language.
To confirm that you want to use
3.
these settings, press "ok" button
a The appliance is rinsed. When the
display shows "Choose beverage",
the appliance is ready for use.
Tip: You can change the language at
any time.
→ "Basic settings", Page 49
6.3 General information
Please bear this information in mind
so that you can get the best out of
your appliance.
Notes
¡ The appliance has been pro-
grammed at the factory with stand-
ard settings for optimum operation.
¡ The grinder has been factory-set
for optimum operation. If coffee is
only dispensed drop by drop or is
too thin and with too little crema,
you can adjust the grinding level
when the grinder is running.
→ "Adjusting the grinding level",
Page 48
¡ During operation water droplets
may form at the ventilation slits.
¡ If you do not perform any actions
on the appliance for a certain
period, it will switch off automatic-
ally. You can change the duration
in the basic settings.
re-
⁠ .