LG LCE3010SB Owner's Manual page 21

CAUTION
• Never use abrasive scrubbing pads or cleaners.
They can cause permanent damage to the
cooktop surface.
Setting the Controls
To operate the control panel, press firmly with the
flat part of your fingertip.
First Use
The first time that power is supplied to the
cooktop, the display for the controls lights for 1
second.
If you don't turn on the cooktop within 1 hour after
power is supplied to the cooktop, the display for
the controls flashes.
Activating the Cooktop
To turn on the cooktop, press POWER ON/OFF for
approximately 2 seconds. The indicator above the
control will light.
To turn off the cooktop, press POWER ON/OFF.
The indicator light above the control will turn off.
NOTE
• After turning on the cooktop with the POWER
ON/OFF control, you must select one of the
elements within 15 seconds using the element
ON controls. If no selection is made, the cooktop
will turn off for safety.
Selecting the Element
To select the desired element, press the ON
control for that element.
The display for the selected element will light. The
power level indicator lights flash, but no power
level is set.
NOTE
• Once the element has been selected with the ON
control, the power level must be selected within
10 seconds with the element power settings.
Otherwise, the element will turn off for safety.
Setting the Power Level
The power level for the selected element can be
set from 1 to 9.
To select the power level:
1
Select the number on the element power
settings for the active element to adjust the
power level from 1 to 9
2
Selecting a number on the element power
settings activates the element. The indicator
lights flash once and lock in your selection.
NOTE
• If a power level is not selected, the element will
turn off after 10 seconds.
To adjust the power level:
1
Select ON for the desired element.
2
Select a number in the element power
settings to adjust the power level. If a power
level is not selected after 10 seconds, the
element's power level remains the same.
To turn off the element:
1
After cooking is complete, press OFF for the
selected element.
2
The display for the corresponding element
turns off.
3
If the POWER ON/OFF control is selected, all
elements are turned off.
OPERATION 21