- Either USB bus-powered or external adaptor - Bluetooth player function Make sure MXi.3BT mixer is used in the area of ventilation. Do not install or use this product near any direct hear source(such as amplifier or heater). Computer USB power or external voltage converter can also supply power to MXi.3BT mixer.
Page 6
Control Elements 1- USB PORT This Type B USB port can be used to connect the computer via Type B to A connector. 2- POWER SWITCH To turn on/off the unit. 3- POWER LED This LED will light up when the unit is powered on. 4- MIC/LINE IN JACK This combined jack can be used to connect mono signal, such as XLR microphone or 1/4"...
Page 7
Control Elements 13- PAN/BAL This is the panorama control or balanced control. This control is used for stereo effect field of the signal. Set this control in middle position, signal levels of Channel L & R will be same. When the control is set to top stop, only Channel L receives the signal, Channel R can not.
Page 8
Control Elements 19- PAIR AND DISPLAY LED The buttom is used to control the Bluetooth player, and the LED is to display the working status of the Bluetooth player. A. After power on the mixer ,Bluetooth player enters standby mode, LED display: flashes twice every two seconds.
Need help?
Do you have a question about the MXi.3BT and is the answer not in the manual?
Questions and answers