Adjustment Of Pressure Switch; Troubleshooting - Fimar MCD/950CS Instruction Manual

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ PACKAGING MACHINE WITH SEALING BAR MSD

ADJUSTMENT OF PRESSURE SWITCH

In case of suction problems during the auto-
matic operation of the equipment, adjust
screw (P) in order to regulate the suction time
of vacuum pump (Use supplied key "Torx
T30").
– Rotate clockwise in order to increase the
suction time of pump
– Rotate anti-clockwise in order to de-
crease the suction time of pump
Important
The equipment is already regulated when
it is tested in factory. Carry out this oper-
ation only in case of real need.

TROUBLESHOOTING

The purpose of the following information is to help the operator to identify and correct any
anomalies or malfunctions that may occur during use.
Some faults may be resolved by the user, others require specific technical skills or abilities
and must only be performed by qualified personnel with recognised experience in the spe-
cific sector.
Important
Do not remove internal appliance parts.
The manufacturer is not liable for any machine tampering!
Table 2: Operating malfunctions
Problem
The equipment does not start.
FIMAR-RUSSIA.RU +7 495 989 1055
Causes
Main switch off.
No mains power.
- 13 -
MSD/300P - MSD/300
P
MSD/400 - MSD/500
P
Solutions
Turn on main switch.
Contact your dealer or
authorised service centre.
English language
GB