Sony CLIE PEG-NX73V Handbook page 67

Performing the HotSync
Note
Do not remove your CLIÉ handheld from the cradle until the
HotSync
"Memory Stick" media or CF card while the HotSync
is being performed. Otherwise, the Palm™ Desktop for CLIÉ
software may not finish normally.
If the HotSync
Make sure that the HotSync
Windows task tray.
If the HotSync
Start, select Programs (for Windows XP, select All
Programs), Sony Handheld, and click HotSync
Manager. Check that the HotSync
task tray and press the HotSync
the HotSync
The message is displayed on your computer screen when the
HotSync
* From this point onwards, where Windows XP Home Edition and
Windows XP Professional are common, they will both be referred to
as Windows XP.
Tip
If you cannot perform a HotSync
Refer to the "Troubleshooting Q&A."
Exchanging and updating files/data using the HotSync
®
operation
®
operation is complete. Also, do not insert or remove
®
operation does not start
icon is not displayed in the task tray, click
®
operation.
®
operation starts.
icon is displayed in the
icon is displayed in the
button on the cradle to start
®
operation
®
operation
®
operation
67