Sony CLIE PEG-NX73V Handbook page 108

Performing the IR HotSync
2
Click the HotSync
bottom right of the taskbar) once again and select Setup
from the shortcut menu.
The Setup dialog box is displayed.
3
Click the Local tab.
4
Adjust the following settings as needed.
• Serial port: Specifies a virtual port for an infrared port. If you are not
sure of the connection port, refer to the Infrared Monitor in the
Control Panel.
• Speed: Determines the speed at which files/data are transferred. Try
the As Fast As Possible rate first, and adjust downward if you have
any problems.
5
Tap OK.
The IR HotSync
Note
When performing a local HotSync
local HotSync settings.
b
For details, refer to "To restore the local HotSync settings" on page 109.
Exchanging and updating files/data using the HotSync
operation (Other HotSync
®
operation
icon in the Windows task tray (at the
®
operation is enabled.
®
operation with the cradle, you need to restore the
®
operations)
®
108