GUS Disinfection Soak Station™ Table of Contents Principle of Operation Safety Precautions Environmental Conditions Supply Ratings Warning Symbols Signal Words Quick Troubleshoot General Information Main Power / Ratings Plate Specifications for GUS Disinfection Soak Stations Installation and Setup Upon Delivery Installation Countertop models Mobile models (Assembly of Cart Required)
GUS Disinfection Soak Station™ Principle of Operation The GUS® Disinfection Soak Station provides for the safe soaking of heat sensitive instruments in high-level disinfectant solutions. The system’s blower forces air through a carbon filter which removes toxic vapor from the high-level disinfectants.
GUS Disinfection Soak Station™ Warning Symbols The meaning of the labels and symbols that appear on the packaging and/or the system are as follows: Dangerous electrical voltage Hazardous area Protective Grounding Signal Words The following signal words are used throughout this manual: WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
1. Check to make sure that the in-line filter on the suction hose is not clogged. If it is, you must replace the filter. Contact CIVCO Medical Solutions for replacement in-line filters. 2. If the disposal pump is still not working, call CIVCO Medical Solutions at 1-800-445-6741. M0035_E...
GUS Disinfection Soak Station™ General Information The GUS Disinfection Soak Station eliminates vapors from high-level disinfectants and contains splashes and spills. Blowers pull fumes into a patented carbon filter, where they are adsorbed and eliminated. Clean air is returned to the room through the top louver panel.
Match all items in the package with those listed on your packing list. Inspect each item for damage. Fill trays (if provided) with water and check for leakage. If any components are damaged or missing, or if you have any questions, call CIVCO Medical Solutions at 1-800-445-6741. Do not use the system. Installation COUNTERTOP MODELS 1.
GUS Disinfection Soak Station™ MOBILE MODELS (ASSEMBLY OF CART REQUIRED) 1. Remove the cart from the top of the box and place onto a level surface. Assemble as directed. 2. Gently lift the system out of the packing box and, with someone holding the cart, place the system on top. CAUTION: It may require two people to lift the system and place it onto the cart.
Disposal of Disinfectant In some states and municipalities, it is illegal to dispose of used disinfectants without first deactivating them. Deactivation also protects the user from exposure to splashes and spills. CIVCO Medical Solutions manufactures Glute-Out®, a glycine-based neutralizer (part # 610-1045).
Page 10
GUS Disinfection Soak Station™ 2. We strongly recommend the use of neutralizer (Glute-Out®) when using OPA or glutaraldehyde to prevent splashes, spills, and exposure to vapor. Add the required amount of neutralizer into the soak tray containing high-level disinfectant and allow sufficient time for neutralization to take place. 3.
GUS Disinfection Soak Station™ Filter Life GUS® has a patented filter that, in normal everyday use, will have a six-month life. Call CIVCO Medical Solutions at 1-800-445-6741 to purchase additional filters. Filter Replacement WARNING: Turn the main power switch OFF and disconnect the power cord from the electrical outlet.
GUS Disinfection Soak Station™ Cleaning the System WARNING: When cleaning the system, always wear appropriate personal protective equipment. Potentially infectious material adhering to the unit could pose an infection control risk. CAUTION: Do not use solvents to clean the acrylic door. Doing so may damage the doors. CAUTION: Do not wipe surfaces with hard or abrasive materials.
If the system is not working correctly or is defective, contact CIVCO Medical Solutions and we will repair or replace the device at our option during the warranty period.
Need help?
Do you have a question about the GUS G25-S and is the answer not in the manual?
Questions and answers