1/4 - 20 x 3/4" lg. ss rnd. hd. scr. w/toothed washer (4 pages)
Summary of Contents for Civco GUS G25CER
Page 1
Model G25CER Vapor Management System (For Medivators CER Endoscope Reprocessor) Instruction Manual Medivators Reprocessing Systems Manufactured in USA for CIVCO Medical Solutions 102 First Street South Kalona, IA 52247 USA Tel: 1-800-445-6741 Fax: 1-877-329-2482 Table of Contents Web : WWW.CIVCO.COM...
® Model G25CER Instruction Manual Table of Contents Labels and Symbols ....................2 Environmental Conditions ..................2 Supply Ratings ......................2 Important Information ....................3 Please Read Before Use ..................3 Intended Use ............................3 Instruction Manual ..........................3 Repair and Modification ........................3 Precautions ............................
® Model G25CER Instruction Manual Labels and Symbols The meaning of the labels and symbols that appear on the packaging and/or the system are as follows: Dangerous electrical voltage Hazardous area Protective Grounding Environmental Conditions • For indoor use only. •...
CIVCO Medical Solutions. Repair and Modification Do not modify or attempt to repair without contacting CIVCO Medical Solutions. Contact CIVCO Medical Solutions to purchase replacement parts. Equipment damage can result from user attempts to repair or modify system components.
Do not replace the system’s filters unless all disinfectant has been removed from the system. • For additional technical assistance, call CIVCO Medical Solutions at 1-800-445-6741. Disinfectant Solution In the United States, only High Level Disinfectants (HLD’s) registered with the Food and Drug Administration (FDA) as “sterilants/disinfectants,”...
® Model G25CER Instruction Manual 1 Functions 1.1 General Information The GUS Vapor Management System eliminates fumes from high-level disinfectants. The blower system pulls fumes into a patented carbon filter, where they are adsorbed and eliminated. Clean air is returned to the room through the top louver panel. ...
® Model G25CER Instruction Manual 1.3 Specifications and Technical Data for G25CER The ratings plate and serial number are located on the right side of the system. Airflow: Air treated (CFM) ..................210 Avg. Face Velocity (FPM) with door closed ..........120 Avg.
2.1 Upon Delivery Inspect the G25CER for damage. If any components are damaged or missing, or if you have any questions, call CIVCO Medical Solutions at 1-800-445-6741. Do not use the system. 2.2 Installation NOTE: Two people are needed to lift the G25CER ...
® Model G25CER Instruction Manual Place an 8-32 X 5/8 screw (supplied) through the hole and tighten with nut supplied. Making sure hose cutouts are still aligned, drill three remaining holes to locate the cart top. Secure with 8-32 x 5/8 screws and nuts. Place the CER Reprocessor on the base plate.
® Model G25CER Instruction Manual 3.2 Changing the Filter CAUTION When changing filter you must wear personal protective equipment – such as eyewear, facemask, moisture-resistant clothing and chemical-resistant gloves. NOTE: Contact Medivators Reprocessing Systems to order replacement filters. Turn the main power switch OFF and disconnect the power cord from the electrical outlet. Remove the top louver panel by unscrewing counterclockwise.
Disconnect the plug from the wall outlet and remove the top louver panel and filter to examine fuse. If damaged, replace with a standard 5x20 3.0Amp fuse. If the System is still not working, call CIVCO Medical Solutions at 1-800-445-6741. ...
The warranty covers the soak/rinse tubes and cups for up to one month. If the system is not working correctly or is defective, contact CIVCO Medical Solutions, and we will repair or replace the unit at our option during the warranty period.
Need help?
Do you have a question about the GUS G25CER and is the answer not in the manual?
Questions and answers