Dehumidifying Mode - DeLonghi Artic Whisper PAC EM375WRC Manual

room, exposure to the sun, etc.), the appliance may not be
able to reach comfort conditions.

DEHUMIDIFYING MODE

This is ideal for reducing humidity in the room (spring and au-
tumn, damp rooms, rainy periods, etc). For this type of use, the
appliance must be set up the same as for air conditioning mode.
That is, the air exhaust hose (B1) must be fitted to the appliance
to allow the humidity to be discharged outside.
To correctly set this mode:
• Press repeatedly the MODE key (C2) until the dehumidify-
ing indicator (C10) appears.
• The appliance will automatically choose the best air flow.
It cannot be adjusted manually. Also, temperature cannot
be selected in dehumidifier mode so digital display will not
appear.
Note: In case of high ambient humidity, it is possible to drain
the condensate continuously by applying the hose supplied (B5)
to the upper drainage hose (A10) and thus allowing the water
to flow into a container. Remove the external AND internal caps
before connecting the hose (see Fig. 6B). Pay attention the wa-
ter does not overflow onto the floor and the drainage tube is not
obstructed (Fig. 6A).
6A
6B
9
FAN MODE
When using this mode, the air exhaust hose (B1) does not need
to be attached to the appliance.
To correctly set this mode:
• Press repeatedly the MODE (C2) key until the fan
dicator appears.
• Press repeatedly the
flow.
The air flows available are:
Minimum air flow: when maximum quiet operation is
desired.
Medium air flow: when the noise level needs to be
low but with a good comfort level.
Maximum air flow: for maximum performance.
SELECTING THE TEMPERATURE SCALE
The temperature can be displayed in °C or °F.
To change the temperature unit of measure select the air con-
ditioning mode then press both the decrease
crease (C4) keys at the same time for about 3 seconds. You
must follow these steps on both the unit itself AND the remote
control.
SETTING THE TIMER
The timer allows the delayed start up or shut down of the appli-
ance. This function will prevent wasting electricity by optimizing
the operating periods.
How to program delayed shut down
• While the appliance is on in any operating mode, delayed
shut down can be programmed.
• Press the Timer button (C6): the timer indicator (C8) and
hours light up.
• Use the buttons (C3) or
hours until the appliance should shut down.
(C5) key to select the desired air
(C3) and in-
(C4) to set the number of
in-