Table of Contents
Advertisement
Publication no. 201102
• Two high voltage converters, called inverter, for the background light of the operator-
and exposure display. These are a separate boards mounted on top of the CPU board
on the left side
• Two RS232 serial ports.
• One RS232/RS422 serial port.
JP4
JP14
JP13
JP7
JP6
JP15
JP1
JP2
JP3
JP8
September 2003
JP4
JP16
JP11
JP12
JP17
JP19
JP10
JP9
The CPU board is controlling all functions of the
ID camera. The following connectors are locat-
ed on the board.
JP1 External RJ12 connector. RS232.
JP2 External9 pin female D-SUM.
RS232.
JP3 External RJ45 connector. RS232/
RS422
JP4 24VDC power.
JP5 Motor.
JP6 Exposure display
JP7 Operator display.
JP8 Power to the back-light of the oper-
ator display.
JP9 Power to the back-light of the expo-
sure display.
JP10 Left opto sensor board
JP11 Middle opto sensor board.
JP12 A connector to the background de-
bug channel of the Motorola
68HC16 CPU. Only used during
production.
JP13 Keyboard adapter board.
JP14 Keyboard adapter board.
JP15 External RJ12 connector. RS232.
JP16 Right opto sensor board.
JP17 Not used.
JP18 Jumpers for RJ45 connector.
JP19 Light sensor.
10
NIC2-2 · Network ID Camera
Triacon AB Sweden
Advertisement
Table of Contents
