Related Manuals for Better Bathrooms BeBa-27528
Summary of Contents for Better Bathrooms BeBa-27528
- Page 1 WALL MOUNTED LED MIRROR WITH DEMISTER BeBa_27528 BeBa_27529 BeBa_27530 • INFRARED SENSOR • BUILT IN DEMISTER • IP44 INGRESS PROTECTION • CAN BE INSTALLED LANDSCAPE OR PORTRAIT...
- Page 2 CONGRATULATIONS ON YOUR PURCHASE Our aim at Better Bathrooms is to bring you extraordinary bathroom products, for less. If you’re after a modern, traditional, or a totally unique style bathroom, we have the fittings and fixtures to bring your ideas to life, so you can fall in love with your space every day.
- Page 3 SAFETY • This mirror should be installed by a qualified electrician. • This fitting is only suitable for connection to a 220-240V earthed supply in accordance with current IEE wiring regulations, and should be installed in accordance with local Building Regulations. •...
- Page 4 BATHROOM ZONES Zone 0: The interior of the bathtub or shower basin. The area around the bathtub or shower basin up Zone 1: to a height of 2.25m above the floor The area stretching to 0.6m outside the bath or Zone 2: shower and above the bath or shower if over 2.25m...
- Page 5 PARTS SUPPLIED WALL PLUGS (X4) SCREWS M4 (X4) PLEASE NOTE: It is the installers responsibility to ensure that the fittings are suitable for the type of wall. Alternative fittings may be required (Not Supplied). If unsure professional advice should be sought. TOOLS REQUIRED tool TAPE MEASURE...
- Page 6 INSTALLING THE MIRROR NOTE: Ensure that the infra-red sensor will be easily accessible following installation and that at least 20cm of space is left around the sensor to ensure correct operation. The mirror comes with the option of hanging both in landscape or portrait orientation. At the back of the mirror, there are 4 key holes 2 on the vertical side and 2 the horizontal side.
- Page 7 OPERATION Your mirror comes with an infrared sensor located on the right- hand side. To activate the light and de-misting pad, move your hand across the sensor once at a distance of around 5cm. To turn it off, move your hand across the sensor again. SHAVER SOCKET Your mirror comes with a shaver socket located on the inside of the mirror.
- Page 8 TECHNICAL SPECIFICATION Model BeBa-27528 BeBa-27529 BeBa-27530 WxHxD (mm) 500x700x55 600x800x55 1000x700x55 Net Weight (Kg) 11.2 Power Cord length (cm) Rated Power (W) IP Rating IP44 Input 220 - 240V, 50 Hz This product contains a light source of energy efficiency class F.
Need help?
Do you have a question about the BeBa-27528 and is the answer not in the manual?
Questions and answers