Related Manuals for Better Bathrooms BeBa 27007
Summary of Contents for Better Bathrooms BeBa 27007
- Page 1 TOUCH CONTROL LED MIRROR WITH DEMISTER BeBa_27007 • LED LIGHTS • DEMISTER • CONTACTLESS CONTROL • IP44 INGRESS PROTECTION...
-
Page 2: Table Of Contents
CONGRATULATIONS ON YOUR PURCHASE Our aim at Better Bathrooms is to bring you extraordinary bathroom products, for less. If you’re after a modern, traditional, or a totally unique style bathroom, we have the fittings and fixtures to bring your ideas to life, so you can fall in love with your space every day. -
Page 3: Safety
SAFETY • This mirror should be installed by a qualified electrician. • This fitting is only suitable for connection to a 220-240V earthed supply in accordance with current IEE wiring regulations, and should be installed in accordance with local Building Regulations. •... -
Page 4: Bathroom Zones
BATHROOM ZONES Zone 0: The interior of the bathtub or shower basin. The area around the bathtub or shower basin up Zone 1: to a height of 2.25m above the floor The area stretching to 0.6m outside the bath or Zone 2: shower and above the bath or shower if over 2.25m... -
Page 5: Parts Supplied
PARTS SUPPLIED WALL PLUGS (X3) SCREWS M4 (X3) ALUMINIUM BAR (X1) PLEASE NOTE: It is the installers responsibility to ensure that the fittings are suitable for the type of wall. Alternative fittings may be required (Not Supplied). If unsure professional advice should be sought. TOOLS REQUIRED tool TAPE MEASURE... -
Page 6: Installing The Mirror
INSTALLATION The mirror is supplied with a hanging bar to mount the mirror onto the wall. At the back of the mirror there is a corresponding bar which is designed to slot onto the hanging bar. Choose the desired position of the mirror, and from that determine the required position of the hanging bar. -
Page 7: Product Overview
PRODUCT OVERVIEW LED lamps Infra-red sensor (on side) Demister (on rear) -
Page 8: Operation
OPERATION When the mirror is connected and hung securely onto the wall, turn the mains power back on and the mirror will be ready to use. Your mirror has an infrared sensor located on the side. To activate the light and the demister, move your hand across the sensor once at a distance of around 5cm. -
Page 9: Technical Specifications
TECHNICAL SPECIFICATION Model BeBa_27007 LxHxW (cm) 60x60x6 Net Weight (Kg) Power Cord length (cm) Rated Power 8W (demister) 16W (LEDs) IP Rating IP 44 Input 220 V - 240 V 50 Hz DISPOSAL Recycling facilities are now available for all customers at which you can deposit your old electrical products.
Need help?
Do you have a question about the BeBa 27007 and is the answer not in the manual?
Questions and answers