Related Manuals for Better Bathrooms BeBa 27011
Summary of Contents for Better Bathrooms BeBa 27011
- Page 1 WALL MOUNTED LED MIRROR BeBa_27011 BeBa_27012 • LED LIGHTING • BATTERY POWERED • IP44 INGRESS PROTECTION...
-
Page 2: Table Of Contents
CONGRATULATIONS ON YOUR PURCHASE Our aim at Better Bathrooms is to bring you extraordinary bathroom products, for less. If you’re after a modern, traditional, or a totally unique style bathroom, we have the fittings and fixtures to bring your ideas to life, so you can fall in love with your space every day. -
Page 3: Safety
SAFETY • This is for domestic, indoor use only. • This product may contain delicate parts – be careful during handling and maintenance to avoid breakage. • If any modification is made to the fitting will invalidate the warranty and may render the product unsafe. -
Page 4: Bathroom Zones
BATHROOM ZONES Zone 0: The interior of the bathtub or shower basin. The area around the bathtub or shower basin up Zone 1: to a height of 2.25m above the floor The area stretching to 0.6m outside the bath or Zone 2: shower and above the bath or shower if over 2.25m... -
Page 5: Parts Supplied
PARTS SUPPLIED WALL PLUGS (X2) SCREWS M4 (X2) PLEASE NOTE: It is the installers responsibility to ensure that the fittings are suitable for the type of wall. Alternative fittings may be required (Not Supplied). If unsure professional advice should be sought. TOOLS REQUIRED tool TAPE MEASURE... -
Page 6: Installation
INSTALLATION To install the batteries: 1. Unscrew the battery compartment from the side of the mirror and pull it out. Unscrew 2. On top of the battery compartment is a cover held in place by a screw. Remove this screw. Screw... - Page 7 3. Add 8 x AA batteries (not included) into the battery compartment, then screw the cover back on. 4. Replace the battery compartment in the side of the mirror, tighten the screws and press the button to test the operation of the lights. Power switch Tighten screws...
- Page 8 HANGING THE MIRROR The mirror should be hung in portrait orientation. At the back of the mirror, there are 2 key holes on the vertical sides. To hang the mirror, you will need to drill two holes into the wall, ensuring that there are no wires or pipes behind the wall before commencing.
-
Page 9: Operation
OPERATION At the bottom right hand corner of the mirror is a round on/off switch. Use this to turn on and off the mirror’s lights. CLEANING AND MAINTENANCE Never use products containing bleach or abrasive cleaners, as these will have a detrimental effect on the appearance and lifespan of the product. - Page 10 DISPOSAL Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating sites run by their local councils. Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment.
Need help?
Do you have a question about the BeBa 27011 and is the answer not in the manual?
Questions and answers