Multitech RBS3010EU22BN00 User Manual page 9

Note: When possible, install away from foot traffic and where heavy items will not be set on or rolled over the
rope.
1. Spread the rope into the area you want to monitor for leaks.
2. Attach the sensor to a wall:
®
Radio Bridge LoRaWAN
For a indoor sensor, use the included large adhesive pad to secure the case to a wall. For
increased security (optional), fasten the case to the wall using the included tamper screw as
shown. The tab will break away and send a tamper alert if the case is forcibly removed from
the wall.
For best radio performance, avoid placing the sensor in another enclosure or in an area
crowded with other equipment.
Wireless Sensor Water Detect Sensor with Temperature and Humidity User Guide
QUICK START
9