Advertisement
Table of Contents
Contents
BUTURE Beta03 - Jump Starter Manual
JUMP START YOUR CAR
- Insert the jumper cable into the jump starter (220% power).
- Connect the clamps to car battery (red to +, black to -).
- Start your car engine.
ABOUT THE FORCE START FUNCTION
If three attempts fail when you correctly connected the clamps to your car, you can use the Force Start Function to enter boost mode.
3 steps to fix the problem:
- Check the clamps connection and the product's battery is above 20%.
- Press the Force Start Button for 3 seconds.
- The indicator will be green, and go back to start engine ignition.
When using this function, auto-detection and safety features will be disabled temporarily.
ABOUT THE TROUBLESHOOTING
In any of the following situations, the smart clamp will turn protections on:
| Indicator | Situations |
| Flashing red and green | Standby Status |
| Solid green | Ready to start |
| Solid red |
|
| Solid red with discontinuous beep |
|
| Solid red with long beep | Short-circuit protection - Don't connect the clips together or to the same metal |
| Other | Please contact support@ibuture.com with details |
CHARGE OTHER DEVICES
- Plug the cable into any USB outport.
![CHARGE OTHER DEVICES - Step 1]( "BUTURE - Beta03 - CHARGE OTHER DEVICES - Step 1")
- Press the power button.
![CHARGE OTHER DEVICES - Step 2]( "BUTURE - Beta03 - CHARGE OTHER DEVICES - Step 2")
LED LIGHTING
IMPORTANT SAFETY WARNING
- Store in a cool and well-ventilated place out reach of children and pets.
- Do not place the product in high temperature environment for a long time. The operation temperature of this product is -20—60º C. The storage temperature should not exceed 50ºC/122º F.
- Only start vehicles with the smart jumper cable supplied by the manufacturer,
- Do not use the product if the clamp or cable is damaged.
- Do not connect the red and black clamps together when the product is outputting.
- Do not connect the red and black clamps to the same piece of metal.
- Do not disassemble or modify this product.
- Do not use detergent to clean this product.
- Do not abuse this product and avoid heavy dropping or repeatedly hitting it
- Do not operate the product in explosive environments such as flammable liquids, gases or dusts.
- Do not immerse the product In water.
- Do not litter the product and it should be safely recycled.
- Do not incinerate the product or exposed to high temperatures, as they may explode,
- Only use replacement parts or accessories provided or recommended by manufacturer.
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Beta03 that isn't answered in the manual? Leave your question here.