Rafter Hook - Hitachi NR 90 AC5 Instruction And Safety Manual

English

RAFTER HOOK

With the NR90AC5, an included hook can be attached by
using three M5 14 fl ange bolts which are included with
×
the tools. When the tool is detached from the hose and not
in use, the hook can be used to store the unit.
● When attaching or detaching the hook, make
sure the hose is detached and the nails are
removed from the tool.
(1) How to attach the hook
Hexagonal bar wrench for M5
2
1
Main unit
Fig. 1
• When attaching, use a hexagonal bar wrench for M5
(separate).
• Fix the hook (1) to the main unit in three locations
using the M5 14 fl ange bolts (2) (Fig. 1).
×
Fastening Torque
8.3±0.5 N m 6.1±0.4 ft.lbs
•
• The hook can be attached in any direction. Adjust the
hook according to the operating environment (Fig. 2).
(2) How to detach the hook
Detach the hook by reversing the aforementioned
steps for attaching the hook.
20
WARNING
Fig. 2
85±5 kgf
● When the hook is attached, operate only
with SINGLE SEQUENTIAL ACTUATION
MECHANISM
ACTUATION MECHANISM. For switching
between
CONTACT, see the appropriate section in
"METHODS OF OPERATION".
● Disconnect the air hose when hook the unit.
● Do not hook on high or unstable locations.
Also, do not hook it to the body, clothing, belt
or other personal items.
cm
•
WARNING
and not with
SINGLE SEQUENTIAL
CONTACT
and