Loading Nails - Hitachi NR 90 AC5 Instruction And Safety Manual

LOADING NAILS

● When loading nails into Nailer,
1) do not pull trigger;
2) do not depress push lever; and
3) keep Nailer pointed downward.
(1) Insert nail strip into rear of the magazine.
Magazine
(2) Slide the nail strip forward in the magazine.
The nail strip should pass the nail stopper.
(3) Pull the nail feeder (B) back to engage the nail feeder
(A) to the nail strip.
Nail Feeder (A)
NOTE
● Quietly push the Nail Feeders (A) and (B) against the
nail.
If the Nail Feeders (A) and (B) are released behind
the magazine and bumped against the nail, the
connecting plastic of the nail can be damaged.
WARNING
Nail Stopper
Nail Feeder (B)
● Use nail strip of more than 5 nails.
The Nailer is now ready to operate.
Removing the nails:
● Disconnect air hose from Nailer when
removing nails from the magazine.
1 Pull the nail feeder (B) backward.
2 Return the nail feeder (B) forward quietly while
pushing the nail feeder (A).
3 Push the nail stopper toward the magazine side,
and pull out nails from the back of the magazine.
Nail Feeder (B)
Nails
English
5
WARNING
1
2
Nail Feeder (A)
Nail Stopper
3
15