Removing The Stand - Samsung SR350 User Manual

Removing the Stand

― Before removing the stand from the product, place the product on a flat and stable surface with the screen facing down.
― The exterior may differ depending on the product.
1
Place a soft cloth over the table to protect the
product and place the product onto the cloth
so that the front of the product is facing
downwards.
Remove the screws from the bottom of the
stand neck.
- Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
2
While holding the product with one hand, pull the
stand neck with your other hand to in detach the
stand as shown in the figure.
3
Turn the connecting screw at the bottom of the
stand base to separate it.
4
Remove the stand neck from the stand base by
pulling it in the direction of the arrow as shown
in the figure.
19