Table of Contents
Advertisement
GMV DC Air Handler
Phenomenon
The unit can't start
The unit stops after running for a while.
Poor cooling effect
Poor heating effect
Indoor fan doesn't start
up during heating
If air conditioner still fails to work normally after checking and handling as described
above, please stop using it immediately and contact local service center for assistance.
Power supply is not connected.
1
Circuit breaker tripping caused by leakage of electricity.
2
Input voltage is too low.
3
Defect of main PC-board.
4
The inlet or outlet of ODU or IDU are blocked by obstacle.
1
The filter is dirty.
1
Too heavy heat load of room (e.g. too many people)
2
Door or windows is open.
3
Inlet and outlet of IDU are blocked.
4
Setting temperature is too high.
5
Refrigerant is insufficient (e.g. refrigerant leakage)
6
The filter is dirty.
1
Door or window is open.
2
Setting temperature is too low.
3
Refrigerant is insufficient (e.g. refrigerant leakage)
4
At starting, the IDU fan could not operate till the heat exchange
1
become hot, for preventing delivering the cool air.
At defrosting, the IDU fan stopped due to system switch to cooling
2
mode. For preventing delivering the cool air, and resume operating
after defrosting.
17
Troubleshooting
Advertisement
Table of Contents
