NordicTrack ELITE 1400 User Manual page 34

SYMPTOM: The displays of the console do not
function properly
a. If the console does not boot up properly, or
if the console freezes and does not respond,
reset the console to the factory default settings.
IMPORTANT: Doing this will erase all the
custom settings you have made to the console.
Resetting the console requires two people. First,
press the power switch into the off position. Next,
locate the small reset opening (B) on the right side
of the console. Using a bent paper clip (C), press
and hold the reset button inside the opening, and
have a second person press the power switch into
the on (reset) position. Continue holding the reset
button (B) until the console turns on. When the
reset operation is complete, the console will turn off
and then turn back on. If it does not, use the power
switch to turn the treadmill off and then on again.
Once the console turns on, check for firmware
updates (see HOW TO CHANGE CONSOLE
SETTINGS on page 27). Note: It may take a few
minutes for the console to be ready for use.
a
SYMPTOM: The treadmill will not connect to the
wireless network
a. Make sure that the wireless settings on the console
b. Make sure that the settings for your wireless net-
c. If you still have questions, go to support.iFit.com.
B
C
34
are correct (see page 28).
work are correct.